akrnltaskblink.ino

Go to the documentation of this file.

#include <krnl.h>
 
struct k_t * pt1, *pt2, *pt3, *sem1, *sem2, *sem3;
 
 
#define TICKSPEED 10
 
#define STK 100
char st1[STK], st2[STK], st3[STK];
 
volatile int cnt = 0;
 
void highprio()
{
  int clip;
  int loop = 0;
  int eat = 50;
  Serial.println("hello");
  k_set_sem_timer(sem1, 100 / TICKSPEED); //
  while (1) {
    Serial.println(cnt);
    k_wait_lost(sem1, 0, &clip);
    if (clip != 0) {
      //    digitalWrite(13, HIGH); // led on bq we are behind
    }
    loop++;
    if (30 < loop) {
      loop = 0;
      eat += 3;
    }
    k_eat_time(eat);  // lets eat 5 milliseconds
  }
}
 
 
void medprio()
{
  int clip;
  k_set_sem_timer(sem2, 200 / TICKSPEED); //
  while (1) {
    k_wait_lost(sem2, 0, &clip);
    if (clip != 0) {
      //      digitalWrite(13, HIGH); // led on bq we are behind
    }
    k_eat_time(50);  // lets eat 5 milliseconds
  }
}
 
void lowprio()
{
  int clip;
  k_set_sem_timer(sem3, 500 / TICKSPEED); //
  while (1) {
 
    k_wait_lost(sem3, 0, &clip);
    if (clip != 0) {
      digitalWrite(13, HIGH); // led on bq we are behind
    }
    k_eat_time(300);
  }
 
}
 
 
void setup()
{
  {
    int i;
    for (i = 8; i <= 13; i++)
    {
      pinMode(i, OUTPUT);
      digitalWrite(i, LOW);
    }
  }
  pinMode(13, OUTPUT); //LED
  digitalWrite(13, LOW);
  k_init(4, 3, 0);
  Serial.begin(9600);
  pt1 = k_crt_task(highprio, 10, st1, STK);
  pt2 = k_crt_task(medprio, 20, st2, STK);
  pt3 = k_crt_task(lowprio, 30, st3, STK);
 
  sem1 = k_crt_sem(0, 2); // so 1 is highest value
  sem2 = k_crt_sem(0, 2); // so 1 is highest value
  sem3 = k_crt_sem(0, 2); // so 1 is highest value
  Serial.println("stnart");
  k_start(10); // 10 millisecond heartbeat
  Serial.print("oev");
}
 
extern "C" {
 
 
  void k_sem_clip(unsigned char nr, int i)
  {
    cnt++;
    //Serial.print(i);
  }
 
  void k_send_Q_clip(unsigned char nr, int i)
  {
    cnt++;
  }
  void k_breakout()
  {
    unsigned char c;
    c = pRun->nr;
    c =1<< c;
    PORTB = c;
  }
 
}
 
 
 
void loop() {}